|
| |
![[Product Image]](images/65Barracuda.jpg)
Products geared mainly towards slant six powered cars.
You may find the following products at our
e-store.
Visit the Bank of Canada for the current exchange rate to check the
prices in your currency: http://www.bankofcanada.ca/en/exchange.htm
Pricing
| Photo |
Description |
 |
90º Adapter Plate to mount Holley/AFB carb on
Offenhauser 4bbl Intake manifold. Machined from 1/2" 6061-T6
aluminum. Throttle shafts are parallel
to engine for symmetrical fuel distribution. Throttle linkage
is not included. Fasteners are included. |
 |
Starter solenoid mounting plate
kit. Machined from
3/8" 6061-T6 aluminum. Bolts onto
bottom of Slant Six intake manifold and allows the use of stock
starter with twin Dutra Duals exhaust manifolds. Fasteners are
included. |
 |
Silicone Heater Hose Upgrade Kit. Always easily
removable and lasts forever. Kit consists of:
- 3' of 1/2" hose
- 4' of 5/8" hose
- 2 each of 1/2" SS ET gear clamps
- 4 each of 5/8" SS ET gear clamps
Never replace a heater hose again!
Need a different size or length? Let us know! |
 |
Intake manifold heater kit for manifold with OEM-style
exhaust manifold. Machined from 1/2" 6061-T6 aluminum.
Helps fuel distribution and minimizes off-idle bog by restoring a hot
spot in the intake manifold floor.
Includes starter solenoid mounting holes when using headers or twin Dutra Duals exhaust
manifolds. Bolts onto
bottom of Slant Six intake manifold and has a machined-in pocket to
match the bottom of the intake manifold. Splice it into the
return line from the heater core. Kit consists of:
- 3 each of 5/16" nuts, bolts, & washers
- 2 each of 3/4" brass street elbows
- 2 each of 5/8" brass hose barb to 3/4" NPT adapters
- 10' of silicone hose
- 2 each of 5/8" ET-10 SS Gear Clamps
(The most expensive part of this kit is the hose. We
recommend it because of the heater's close proximity to the exhaust
pipes.)
|
 |
Rochester QuadraJet mounting kit for 4bbl intake
manifold. You supply the fuel line, carb, air cleaner, and
throttle linkage. Reuse your old fuel line or make
one from 5/16" brake line. Kit includes:
- Edelbrock PN2696 Spreadbore to Squarebore adapter
- Edelbrock PN1932 Hot Air to Electric Choke Conversion
- Mr Gasket PN 3704 Vacuum Cap Assortment
- 3/8" to 5/16" Fuel Line Bushing
- 1/4" brass NPT Pipe Plug
If you are looking for a carb for your Offy intake, remember that
a new Holley 390 CFM 4bbl is more expensive. Check the
performance products page for current pricing.
|
|
